Mold Removal Gel

The problem with liquids is gravity

Anyone who has tried to clean the black seam along a bathtub knows why sprays fail: you spray, it runs, and ten minutes later the product is on the floor and the stain is exactly where it was. Mold Removal Gel was formulated to solve that single problem. It is a high-viscosity thixotropic gel — thick enough to hold a 4 mm bead on a vertical tile without sagging, fluid enough under the nozzle to push deep into a hairline silicone joint.

That cling is what does the work. Instead of a fifteen-second contact time, the gel stays on the surface for six to eight hours, which is long enough for the active oxygen agents to break down the biofilm that holds the staining in place. You apply it, you go to bed, and you rinse it off in the morning. There is no scrubbing step in this product, and that is deliberate — scrubbing a soft silicone seam damages it, which makes it hold moisture, which brings the problem back faster.

Why it belongs in the cleaning caddy

• Clings vertically — holds a 4 mm bead on tile, grout and vertical silicone without running or dripping.
• Precision nozzle — a 3 mm tip that reaches into corners, shower door tracks and the seam behind a tap base.
• No scrubbing required — active oxygen agents do the work over a 6–8 hour contact window.
• Works on sealed surfaces — ceramic tile, grout, silicone and acrylic sealant, glass, enamel, stainless trim, window frames, washing machine gaskets.
• Low odour — no chlorine bleach vapour; safe to use in a small bathroom without ventilating the whole house.
• One tube goes a long way — 120 g covers roughly 8–10 metres of standard seam.

How to use

1. Dry the surface. Wipe the area completely dry with a cloth — water dilutes the gel and breaks the cling. Do not pre-rinse.
2. Apply a continuous bead. Squeeze a 3–4 mm thick line directly over the affected seam or patch. For mould inside a silicone joint, apply slightly more so the gel can penetrate.
3. Leave it alone. Allow 6–8 hours. Overnight is ideal and is how most customers use it. Do not wipe during this window — the gel is working.
4. Rinse and wipe. Rinse with clean water and wipe away the residue with a damp cloth. On stubborn or long-standing staining, repeat once before deciding it hasn't worked.